
Reverse Grip Bench Press: Setup and Safety | Combat Fitness
The Reverse-Grip Bench Press: Upper-Chest Gains, Easier on the Shoulders
Reverse benching is a barbell bench press done with an underhand grip, palms facing you instead of away. The reverse grip bench press shifts more of the work to the upper (clavicular) chest, pulls the biceps in, and keeps the elbows tucked, which is why many lifters find it easier on the shoulders than a standard grip. We program pressing for service members and selection candidates inside our military fitness programs, and we use this variation when an athlete needs more upper chest or a press that spares a cranky shoulder.
The trade-off is control: the unrack is awkward and the first sessions feel unstable. Below: setup, muscles, the case for it, and programming.
How Do You Do a Reverse-Grip Bench Press Safely?
Grip the bar underhand at shoulder width or slightly wider, unrack with a spotter, and lower the bar to the bottom of your chest with elbows tucked. Press up and back toward your face. Start light, because the grip and the bar path both feel new.
Step-by-Step Setup
Set the safeties just below chest height, so a slipped bar or missed rep has somewhere to land.
Grip underhand at shoulder width or a little wider, thumbs wrapped. Never go thumbless on this lift.
Stack the wrists: bar in the heel of the palm, wrists straight over the forearms.
Set your back: shoulder blades back and down, feet planted, moderate arch.
Unrack with a spotter, who guides the bar out of the hooks and over your chest.
Lower for about two seconds, elbows close to your sides, to the bottom of your sternum.
Press up and slightly back so the bar finishes over your shoulders.
Common Mistakes
The big three: loading it like a normal bench on day one, letting the wrists fold back (which makes the bar feel ready to roll), and touching too high on the chest. This bar path sits lower than a standard bench, and forcing it higher strains the shoulder.
Do You Need a Spotter?
Yes. The underhand grip is less secure than an overhand grip, and a bar that rolls out of your hands lands on your chest or neck. NSCA spotting guidance calls for a spotter on over-the-face barbell lifts like this one. Set the safety arms too.
What Muscles Does the Reverse-Grip Bench Press Work?
The reverse-grip bench press works the pecs, front delts, and triceps like a standard bench, but it biases the upper (clavicular) head of the chest and adds biceps. The underhand grip changes the line of pull on the upper arm, which shifts which part of the chest does the most work.
Upper Chest (Clavicular Head)
The clavicular head runs from the collarbone to the upper arm and helps raise the arm forward. In a 2005 study, a supinated grip increased clavicular pec activity compared with a standard grip. A 2021 study found the clearest advantage at a 30-degree incline, with little difference flat. The fair read: the reverse grip shifts emphasis upward, more so on a slight incline.
Biceps and Triceps
The same 2005 study found more biceps activity with the supinated grip. The biceps cross the shoulder and assist forward arm movement, so the underhand position lets them help. The triceps still carry the lockout, and with tucked elbows they do a large share of the press.
Why the Grip Changes the Line of Pull
An overhand grip lets the elbows flare. An underhand grip rotates the upper arm outward and pins the elbows to the torso, so the press moves forward and up, closer to a front raise. That forward motion is the upper chest’s job, which is why the emphasis shifts.
Why Use the Reverse Grip? Upper Chest and Shoulder-Friendly Pressing
The reverse grip solves two problems at once: an upper chest that lags, and a standard bench that bothers your shoulders. It does not replace the flat bench. It is a targeted variation for athletes who need one or both fixes.
Building a Lagging Upper Chest
Most tactical pressing is horizontal: flat bench, push-ups, dips. That work favors the larger mid and lower chest. The reverse grip is one fix for that imbalance, alongside incline pressing, and our guide on why your upper chest lags and how to fix it covers the full plan.
Pressing When Your Shoulders Push Back
The reverse grip bench press keeps your elbows close to your body, which limits shoulder abduction. Reviews link grips wider than about 1.5 times shoulder width to higher shoulder injury risk. A 2024 modeling study found narrower grips and retracted shoulder blades lowered shoulder joint loads. The reverse grip puts you in that tucked, narrower position by default.
No study has measured reverse-grip shoulder loads directly, so treat it as a strong option, not a cure. If a standard bench pinches your shoulder, try a light reverse-grip set before dropping pressing. For the general case, see our answer to do bench presses work your shoulders.
Why It Matters on the Job
Loading a litter onto a vehicle or driving through a doorway happens with the elbows close to the body, not flared on a flat bench. Training that position builds strength where the work happens, the core idea behind functional strength for military performance. A pain-free press is one you can keep training.
How Do You Program Reverse Benching?
Program reverse benching as a secondary press: 2 to 4 sets of 6 to 10 reps, once or twice a week, after your main lift. Start at roughly half your flat working weight, and stop each set one or two reps short of failure.
Load and Reps
Moderate reps suit this lift better than heavy singles, because the grip is the weak link and a missed heavy rep is its riskiest moment. Add reps first, then load in small jumps. Research supports 10 or more weekly sets per muscle for growth, so count reverse-grip sets toward your chest total, not on top of it.
Where It Fits in Your Week
Put it second in an upper-body session, or lead with it on a day your shoulders need a break. Pair it with a row to keep pressing and pulling balanced. For how chest work fits a full week, see a strength workout for athletes.
A sample upper-body day:
Flat or incline barbell press: 4 sets of 5 to 8
Reverse-grip bench press: 3 sets of 6 to 10
Chest-supported row: 3 sets of 8 to 12
Pull-ups: 3 sets of 6 to 10
If you would rather follow a done-for-you plan, our guide to choosing a strength & endurance program shows what to look for.
Frequently Asked Questions
What is the reverse-grip bench press?
The reverse-grip bench press is a barbell bench press done with an underhand (supinated) grip, palms facing your head. It shifts emphasis toward the upper chest, adds biceps involvement, and keeps the elbows tucked. Lifters use it to build the upper chest and as a shoulder-friendlier press.
How do you do a reverse-grip bench press safely?
Set the safety arms just below chest height, grip underhand with thumbs wrapped, and stack your wrists. Unrack with a spotter, lower the bar to the bottom of your sternum with elbows tucked, then press up and back toward your face. Start light.
Is the reverse-grip bench press better for the upper chest?
The reverse-grip bench press increased upper-chest activity compared with a standard grip in a 2005 study, and a 2021 study found the clearest advantage at a 30-degree incline. It is a solid upper-chest tool, but incline pressing remains the main fix. Use both.
Is the reverse-grip bench easier on the shoulders?
For many lifters, yes. The underhand grip keeps the elbows tucked and the grip narrower, which reduces stress on the front of the shoulder. No study has tested reverse-grip shoulder loads directly, so stop if it causes pain and see a provider.
How much weight should you use on the reverse-grip bench?
Start around half your flat bench working weight for sets of 6 to 10. The grip and bar path take a few sessions to learn, and the lift is harder to control than a standard bench. Add reps first, then load.
Do you need a spotter for the reverse-grip bench press?
Yes. The underhand grip is less secure than an overhand grip, and the unrack is awkward alone. A spotter guides the bar out and over your chest, and safety arms catch a slipped or missed rep. Train it alone only inside a rack with safeties set.
The reverse grip bench press earns its spot for two reasons: it biases the upper chest, and it lets many lifters press hard without irritating their shoulders. Treat it as a secondary press, start light, use a spotter, and progress reps before load. To see where it fits in a full week, grab our free balanced-pressing plan.
References:
Lehman GJ. The influence of grip width and forearm pronation/supination on upper-body myoelectric activity during the flat bench press. J Strength Cond Res. 2005;19(3):587-591.
Arseneault K, Roy X, Sercia P. The effect of 12 variations of the bench press exercise on the EMG activity of three heads of the pectoralis major. Int J Strength Cond. 2021;1(1).
Green C, Comfort P. The affect of grip width on bench press performance and risk of injury. Strength Cond J. 2007;29(5):10-14.
Noteboom L, Belli I, Hoozemans MJM, Seth A, Veeger HEJ, Van Der Helm FCT. Effects of bench press technique variations on musculoskeletal shoulder loads and potential injury risk. Front Physiol. 2024;15:1393235.
Durall CJ, Manske RC, Davies GJ. Avoiding shoulder injury from resistance training. Strength Cond J. 2001;23(5):10-18.
Kolber MJ, Beekhuizen KS, Cheng MS, Hellman MA. Shoulder injuries attributed to resistance training: a brief review. J Strength Cond Res. 2010;24(6):1696-1704.
Fees M, Decker T, Snyder-Mackler L, Axe MJ. Upper extremity weight-training modifications for the injured athlete: a clinical perspective. Am J Sports Med. 1998;26(5):732-742.
Barnett C, Kippers V, Turner P. Effects of variations of the bench press exercise on the EMG activity of five shoulder muscles. J Strength Cond Res. 1995;9(4):222-227.
Saeterbakken AH, Mo DA, Scott S, Andersen V. The effects of bench press variations in competitive athletes on muscle activity and performance. J Hum Kinet. 2017;57:61-71.
Rodríguez-Ridao D, Antequera-Vique JA, Martín-Fuentes I, Muyor JM. Effect of five bench inclinations on the electromyographic activity of the pectoralis major, anterior deltoid, and triceps brachii during the bench press exercise. Int J Environ Res Public Health. 2020;17(19):7339.
Solari F, Burns B. Anatomy, Thorax, Pectoralis Major Muscle. StatPearls. Treasure Island (FL): StatPearls Publishing; updated periodically.
Haff GG, Triplett NT, eds. Essentials of Strength Training and Conditioning. 4th ed. National Strength and Conditioning Association. Champaign, IL: Human Kinetics; 2016.
Schoenfeld BJ, Ogborn D, Krieger JW. Dose-response relationship between weekly resistance training volume and increases in muscle mass: a systematic review and meta-analysis. J Sports Sci. 2017;35(11):1073-1082.
Schoenfeld BJ, Ogborn D, Krieger JW. Effects of resistance training frequency on measures of muscle hypertrophy: a systematic review and meta-analysis. Sports Med. 2016;46(11):1689-1697.
Disclaimer: This article is for educational purposes and does not replace advice from a physician or physical therapist. Stop any exercise that causes sharp or lasting shoulder, elbow, or wrist pain, and get cleared by a qualified provider before training through an existing injury. Always press inside a rack with safeties set or with a trained spotter. Individual results vary with training history, recovery, nutrition, and genetics.

